Question about 37A linkage setup

[Roneo]

I haven't used the 37A in a while, but I still have the linkages. If I recall correctly, the same long rod is used for both the blade and the blower, is that right? I think I just need to shorten the linkage, but wanted to confirm. The long rod runs up front, with the black 12" bar going to the blower.

 

[greenmachineguy761]

Yep, that long rod works for different stuff. Just tweak the linkage length for what you're hooking up, and keep those angles nice and even

 

[Cutterpillow1999]

I had a 37A setup on my old 317, and that long rod did double duty for both blade and blower. When switching to the blower, I had to shorten the linkage slightly and adjust the black bar to get the right angle. Just make sure everything clears when lifting, mine needed a little fine-tuning, but it worked great once done